How to recalibrate your Samsung Note 4 battery


After more than year using the Samsung Galaxy Note 4, I have notice that the battery life seems to be deteriorating. The phone shut down at around 20% of battery level. I was thinking of buying a new battery but I remember I read somewhere on the internet that the battery can be recalibrated to restore the correct reading. That would be the first thing I should do before I decided to get a new battery.



From my online research, there seems to be a built-in function in the phone that does the recalibration but there is no official documentation that stated it. I suspect it is possibly built for Samsung production factories to use it whenever they put in a new battery and it is not meant for public usage.

After I ran the recalibration, the battery life seems to improve and the readings are more accurate as in there were no sudden drops of battery life level percentage which I experienced many times and cause the phone to shut down immediately at 20% level.

Below are the steps on how to start the calibration.

Note

Before you proceed, make sure that your battery life level is less than 30%. This is because of multiple reports from forumers that it works better at around that level. I personally believe that at that level, the voltage level fluctuates more regularly making the reading from that phone inaccurate. At that level, the calibration probably load up a factory battery profile and try to match it to a proper level. Expect the battery level to drop and get ready to start charging again after the drop.

Step 1

Using the phone dialer, dial this number : *#0228#
It will bring up the "BatteryStatus" screen that list down the information about your battery status.


Step 2

Notice that there is a "QUICK START" button at the bottom of the screen. Press the button to start the battery calibration.

References, Sources and Credits:

  1. http://forum.xda-developers.com/showthread.php?t=2561236
  2. http://forums.androidcentral.com/samsung-galaxy-note-4/655663-note-4-battery-won-t-fully-charge.html
  3. https://m.reddit.com/r/galaxynote4/comments/2pcpc5/does_the_code_work_for_battery_calibration/

Comments

Post a Comment

Popular posts from this blog

City Code Table for Casio SGW300HD-1AV Watch

Image
This city codes are provided in the watch user manual but for the ease of references in the web, I put this table in this blog in case i wanted to refer to it using my smartphone. Hope you find this useful. Code City UTC/GMT offset (hours) WLG Wellington 12 NOU Noumea 11 GUM Guam 10 SYD Sydney 10 ADL Adelaide 9.5 SEL Seoul 9 TYO Tokyo 9 KUL Kuala Lumpur 8 HKG Hong Kong 8 SIN Singapore 8 BJS Beijing 8 PER Perth 8 TPE Taipei 8 BKK Bangkok 7 RGN Yangon 6.5 DAC Dhaka 6 KTM Kathmandu 5.75 DEL Delhi 5.5 KHI Karachi 5 KBL Kabul 4.5 DXB Dubai 4 THR Tehran 3.5 JED Jeddah 3 DOH Doha, Qatar 3 MOW Moscow 3 BGW Baghdad 3 HEL Helsinki 2 ATH Athens 2 ANK Ankara 2 ...
Read more

How to force only 4G or LTE network connection for Samsung Galaxy Note 4

Image
This is how to enable Samsung Galaxy Note 4 to force use only 4G (LTE) network connection for high speed internet data. There is a built-in switch in the smartphone that will enable the smartphone to force use only either 3G (WCDMA) or 2G (GSM) network connection but, there is no switch at all to enable the smartphone to force use only 4G (LTE) network connection. Video Tutorial This is screen video record to show you how to do it. If you prefer screenshots, please skip this video and scroll after the video. Screenshots Tutorial If you are clueless about the existing settings that enable you to switch network mode, goto “Settings > More networks > Mobile networks > Network mode”. Steps: Step 1 : From the phone dialer, dial *#2263# and the smartphone will bring you into the “Service Mode” screen like below. Step 2 : Select “[4] LTE BAND PART1 []” and the smartphone will bring you into a screen to select the types of LTE mode. Step 3 : Select “[1] LTE ALL []” to force the smartp...
Read more

Mounting NFS share directory from D-link DNS 320L on Ubuntu 12.04 LTS

Image
Seems like the steps on how to get the NFS mount point from the D-Link DNS 320L NAS server were not properly documented in their user manual. After setting up and enabled the NFS service on the D-Link DNS 320L NAS server, I went ahead to setup and mount the share directory/folder in Ubuntu 12.04 LTS assuming the mount point in NAS was /Volume_1/... but that is not the correct mount point to start with! Found this answer from D-Link forum post from a member (ba43123) that helped me to correctly mount the NFS share directory/folder on Ubuntu 12.04 LTS: After spending most of the last hour on the phone with D-Link Technical Support, I came away with the recommendation to take my Mac (which has successfully connected to a number of NFS shares in the past) to Apple to determine if the network settings for NFS are correct.  This is mostly due to the fact that the people who are taking the calls have no information about NFS in their scripts and Knowledge Base so they are at a total loss...
Read more