Nokia Secret Codes

A list of secret codes to access various Nokia phones' information which are not presented in the menu.
  1. *#06#
    Displays the EMEI, the serial number of the mobile phone.
  2. *#0000#
    Displays the current installed firmware's information.
  3. *#2820# (*#bta_#)
    Displays the Bluetooth address of the mobile phone.
  4. *#62209526# (*#mac_wlan#)
     Displays the Wireless LAN's mac address of the mobile phone.
  5. *#7780# (*#rst_#)
    Soft reset the mobile phone. Restores settings to factory default settings but does not remove installed applications and games on the mobile phone.
  6.  *#7370# (*#res_#)
    Hard reset the mobile phone. Restores settings to factory default settings and remove all install applications and games in the mobile phone.
  7. *#3370#
    Enhanced Full Rate Codec (EFR) activation.
    Enhanced Full Rate increase the voice quality of phone calls with the expense of about 5% more energy compare to Full Rate codec.
  8. *#3370*
    (EFR) deactivation.
  9. *#4720#
    Half Rate Codec activation.
    Half Rate codec will lower the voice quality of phone calls but uses about 30% less energy.
  10. *#4720*
    Half Rate Codec deactivation.

Comments

  1. AnonymousSeptember 16, 2011 at 9:47 PM

    i tried typing *#3370# in my nokia 5800 xm but it doesnt work please let me know the real code plese gret help

    ReplyDelete
  2. bsSeptember 16, 2011 at 10:13 PM

    Sorry, the EFR and Half-Rate codec functions are not available in 5800.

    ReplyDelete
  3. AnonymousSeptember 17, 2011 at 6:20 AM

    i have a nokia 6070 can i type*#3370# efr function in it ples let me know

    ReplyDelete
  4. bsSeptember 17, 2011 at 8:50 PM

    I don't have that phone but you can try it out. No harm on to it. You can also deactivate it back.

    ReplyDelete
  5. bsSeptember 17, 2011 at 8:50 PM

    I don't have that phone but you can try it out. No harm on to it. You can also deactivate it back.

    ReplyDelete
  6. AnonymousSeptember 18, 2011 at 11:00 PM

    CAN U PLESE TELL ME A NOKIA PHONE MODEL TO ACTIVATE EFR THNXS

    ReplyDelete

Post a Comment

Popular posts from this blog

City Code Table for Casio SGW300HD-1AV Watch

Image
This city codes are provided in the watch user manual but for the ease of references in the web, I put this table in this blog in case i wanted to refer to it using my smartphone. Hope you find this useful. Code City UTC/GMT offset (hours) WLG Wellington 12 NOU Noumea 11 GUM Guam 10 SYD Sydney 10 ADL Adelaide 9.5 SEL Seoul 9 TYO Tokyo 9 KUL Kuala Lumpur 8 HKG Hong Kong 8 SIN Singapore 8 BJS Beijing 8 PER Perth 8 TPE Taipei 8 BKK Bangkok 7 RGN Yangon 6.5 DAC Dhaka 6 KTM Kathmandu 5.75 DEL Delhi 5.5 KHI Karachi 5 KBL Kabul 4.5 DXB Dubai 4 THR Tehran 3.5 JED Jeddah 3 DOH Doha, Qatar 3 MOW Moscow 3 BGW Baghdad 3 HEL Helsinki 2 ATH Athens 2 ANK Ankara 2 ...
Read more

How to force only 4G or LTE network connection for Samsung Galaxy Note 4

Image
This is how to enable Samsung Galaxy Note 4 to force use only 4G (LTE) network connection for high speed internet data. There is a built-in switch in the smartphone that will enable the smartphone to force use only either 3G (WCDMA) or 2G (GSM) network connection but, there is no switch at all to enable the smartphone to force use only 4G (LTE) network connection. Video Tutorial This is screen video record to show you how to do it. If you prefer screenshots, please skip this video and scroll after the video. Screenshots Tutorial If you are clueless about the existing settings that enable you to switch network mode, goto “Settings > More networks > Mobile networks > Network mode”. Steps: Step 1 : From the phone dialer, dial *#2263# and the smartphone will bring you into the “Service Mode” screen like below. Step 2 : Select “[4] LTE BAND PART1 []” and the smartphone will bring you into a screen to select the types of LTE mode. Step 3 : Select “[1] LTE ALL []” to force the smartp...
Read more

Mounting NFS share directory from D-link DNS 320L on Ubuntu 12.04 LTS

Image
Seems like the steps on how to get the NFS mount point from the D-Link DNS 320L NAS server were not properly documented in their user manual. After setting up and enabled the NFS service on the D-Link DNS 320L NAS server, I went ahead to setup and mount the share directory/folder in Ubuntu 12.04 LTS assuming the mount point in NAS was /Volume_1/... but that is not the correct mount point to start with! Found this answer from D-Link forum post from a member (ba43123) that helped me to correctly mount the NFS share directory/folder on Ubuntu 12.04 LTS: After spending most of the last hour on the phone with D-Link Technical Support, I came away with the recommendation to take my Mac (which has successfully connected to a number of NFS shares in the past) to Apple to determine if the network settings for NFS are correct.  This is mostly due to the fact that the people who are taking the calls have no information about NFS in their scripts and Knowledge Base so they are at a total loss...
Read more