Adding or Installing Extra HDD to Ubuntu Linux

This operation use to involve a series of many command lines and text editing on "/etc/fstab" configuration file. Now with PySDM, all those manual steps can be simplified with a GUI driven program.

Install PySDM
Copy, paste and hit enter button on your command terminal:
sudo apt-get install pysdm
Running PySDM
System >


Configure Extra HDD to Auto Mount on Boot Up

The HDD shown below only have one volume. If the HDD has more than one volume, it will show right under the "sdb" tree.


Accept all defaults for simplicity and click apply button for PySDM to write to /etc/fstab configuration file.

Mount button can be click to mount the HDD volume without rebooting the system.

Close the program and reboot the PC and check if the volume or HDD configured auto mounted.

References:
  1. PyGTK Storage Device Manager
  2. GUI Fstab Editing with PySDM

    Comments

    Post a Comment

    Popular posts from this blog

    City Code Table for Casio SGW300HD-1AV Watch

    Image
    This city codes are provided in the watch user manual but for the ease of references in the web, I put this table in this blog in case i wanted to refer to it using my smartphone. Hope you find this useful. Code City UTC/GMT offset (hours) WLG Wellington 12 NOU Noumea 11 GUM Guam 10 SYD Sydney 10 ADL Adelaide 9.5 SEL Seoul 9 TYO Tokyo 9 KUL Kuala Lumpur 8 HKG Hong Kong 8 SIN Singapore 8 BJS Beijing 8 PER Perth 8 TPE Taipei 8 BKK Bangkok 7 RGN Yangon 6.5 DAC Dhaka 6 KTM Kathmandu 5.75 DEL Delhi 5.5 KHI Karachi 5 KBL Kabul 4.5 DXB Dubai 4 THR Tehran 3.5 JED Jeddah 3 DOH Doha, Qatar 3 MOW Moscow 3 BGW Baghdad 3 HEL Helsinki 2 ATH Athens 2 ANK Ankara 2
    Read more

    How to force only 4G or LTE network connection for Samsung Galaxy Note 4

    Image
    This is how to enable Samsung Galaxy Note 4 to force use only 4G (LTE) network connection for high speed internet data. There is a built-in switch in the smartphone that will enable the smartphone to force use only either 3G (WCDMA) or 2G (GSM) network connection but, there is no switch at all to enable the smartphone to force use only 4G (LTE) network connection. Video Tutorial This is screen video record to show you how to do it. If you prefer screenshots, please skip this video and scroll after the video. Screenshots Tutorial If you are clueless about the existing settings that enable you to switch network mode, goto “Settings > More networks > Mobile networks > Network mode”. Steps: Step 1 : From the phone dialer, dial *#2263# and the smartphone will bring you into the “Service Mode” screen like below. Step 2 : Select “[4] LTE BAND PART1 []” and the smartphone will bring you into a screen to select the types of LTE mode. Step 3 : Select “[1] LTE ALL []” to force the smartp
    Read more

    Mounting NFS share directory from D-link DNS 320L on Ubuntu 12.04 LTS

    Image
    Seems like the steps on how to get the NFS mount point from the D-Link DNS 320L NAS server were not properly documented in their user manual. After setting up and enabled the NFS service on the D-Link DNS 320L NAS server, I went ahead to setup and mount the share directory/folder in Ubuntu 12.04 LTS assuming the mount point in NAS was /Volume_1/... but that is not the correct mount point to start with! Found this answer from D-Link forum post from a member (ba43123) that helped me to correctly mount the NFS share directory/folder on Ubuntu 12.04 LTS: After spending most of the last hour on the phone with D-Link Technical Support, I came away with the recommendation to take my Mac (which has successfully connected to a number of NFS shares in the past) to Apple to determine if the network settings for NFS are correct.  This is mostly due to the fact that the people who are taking the calls have no information about NFS in their scripts and Knowledge Base so they are at a total loss in
    Read more